Do it yourself
Frequently asked questions about cars and motorcycles

Where to Find the Spark Plugs on a Mercedes A-Class

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Spark plugs

On Mercedes A-Class vehicles (and generally on the 4-cylinder Mercedes engines with M260/M270/M282 architecture), the spark plugs are located in an unusual and less accessible position compared to most cars. They are not in the engine's combustion chamber, but at the bottom of two deep wells or tunnels that open on the right side of the engine (passenger side), near the wall separating the wheel well. To see and reach them, you must first remove the ignition coil that is inserted above them. Even after removing the coil, the actual spark plug is inserted in this tunnel. The reason for such a strange position is related to the engine's architecture and compactness, as the turbo and exhaust ducts occupy the space above and behind the cylinders, so the only exit for the spark plugs is to the side. Replacing the spark plugs on these engines is a medium to high difficulty job due to the limited space, a long sequence of disassembly, and the possibility of causing costly damage while removing the coils.

Posted on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2004-2012 / W169) .. you begin, open the hood of your Mercedes A-Class. Start by removing the exhaust manifold by loosening and taking out the mounting bolts. Next, detach.. …
Mercedes Classe A (2004-2012 / W169) .. Replacing the spark plugs on a Mercedes A-Class? Here’s how to remove the faulty plugs. Pull the hood release lever and lift the hood, securing i.. …
Mercedes Classe A (2012-2018 / W176) .. To replace the spark plugs on a Mercedes A-Class, first open the hood to access the engine compartment and remove the cover from the top of the.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos