Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Mercedes C-Class front parking light replacement

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Light bulb
Operation: Mercedes C-Class front parking light replacement

Today we will see, in this video tutorial, how to remove and replace the front parking bulb of a Mercedes C-Class in its third generation. First we open and lift the bonnet: then we remove the plastic protection cap of the bulbs, the lowest one, and we go to pull our bulb holder, together with the parking bulb; so let's take it off and replace it with the new one. Let's put it back in its seat and hook it up to lock it: then we check that our light bulb works before putting the plastic protection cap back on.


Posted on 28 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - What does the wording "Light Error" on the Mercedes W204 indicate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos