Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight of the Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Headlight

In this guide, follow the steps to remove and replace the front headlamp assembly of the Mercedes C-Class. First, open the hood of your car and start detaching and removing the front bumper. To do this, remove the screws located at the top and bottom of the bumper, as well as the screws found on both sides of the front wheel wells, as shown in the video. At this point, remove all the screws of the headlight, disconnecting the electrical connector of the bulbs. Install the new headlamp assembly and the front bumper!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of a Mercedes C-Class
How to Remove the Rear Headlight of a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. starting, open the hood of your Mercedes C-Class. Begin by removing the inner fender cover near the headlight you need to take out, unscrewing the.. …
Replacing Front Headlight on Mercedes C-Class W205
Replacing Front Headlight on Mercedes C-Class W205
Mercedes Classe C (2014-2021 / W205) ..o remove the front headlight of a Mercedes C-Class W205. First, disconnect the front bumper, at least on the side of the affected headlight. Once t.. …
How to Remove the Front Headlight on a Mercedes-Benz C-Class
How to Remove the Front Headlight on a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. replace the front headlight on a Mercedes-Benz C-Class, following the instructions below. First, open the hood of your car and start removing all the.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos