Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Turn Signal on Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side marker bulb

See other generations:
Video tutorial

Let's replace the bulbs or the turn signal assembly on the Mercedes C-Class. Lift the car with a jack, and remove the cover under the fender.

Use a plastic lever to help remove the turn signal assembly. Replace the damaged bulbs with new ones (same size and voltage).

After replacing the damaged bulbs or the assembly itself, prepare to reassemble it inside the front bumper. Secure the turn signal assembly within the rear bumper parts, and finally connect the electrical connector.

Turn on the instrument panel and test the turn signal operation.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. bulb in the front headlamp of your Mercedes C-Class. First, open the hood of your car and start removing the socket along with the turn signal bulb.. …
Mercedes Classe C (2000-2007 / W203) .. of the exterior rearview mirror of the Mercedes Class C. First, let's move to the side and gently detach the cover of the exterior rearview mirror by.. …
Mercedes Classe C (2007-2013 / W204) .. do you remove the turn signal from a Mercedes C-Class mirror? Let's see how to take out the turn signal from inside the exterior mirror. Disconnect the.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos