Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the headlight on Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Headlight
Operation: Removing the headlight on Mercedes C-Class

Before starting, turn the front wheel relative to the lighthouse on which you are going to work towards the interior of the car. Remove the three clips that secure the wheel arch with the help of a flat screwdriver, then unscrew the two 10 bolts inherent to the front bumper, as shown in the video. Still remaining at the bumper, unscrew the torx t25 that fix it at the top. At this point you can detach it from its seat but without removing it completely: the important thing is to create the space necessary to remove the headlight. Now go back to the wheel arch: remove the plastic that prevents you from accessing the headlight (it has only one clip) and unscrew the 8 mm screw now uncovered. Finally, unscrew the screws that secure the headlight at the top and remove the connectors.


Posted on 3 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos