Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio on Mercedes Viano W639

Model: Mercedes Viano W639, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

This video is currently unavailable

In this video tutorial, you will find the main instructions for removing and replacing the radio on a Mercedes Benz Viano W639. First, get inside the vehicle and remove the radio frame by levering with something thin; then use a screwdriver to unscrew the fixing screws of the radio itself, as shown in the video.

At this point, pull out the radio and disconnect the various electrical connectors at the back; all that’s left is to install the new multimedia system, following the video tutorial to the end!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Mercedes Viano W639?
Where is the fuse box of the Mercedes Viano W639?
Mercedes Viano (2003-2013 / W639, MK 1) The fuse box of your Mercedes Viano W639 (2003-2013) is located inside the cabin. With this dedicated guide, you will finally be able to locate it wi…
Replacing the Rear Suspension on a Mercedes Viano W639
Replacing the Rear Suspension on a Mercedes Viano W639
Mercedes Viano (2003-2013 / W639, MK 1) In this video tutorial, follow step-by-step instructions to remove and replace the rear suspension on a Mercedes Viano W639. First, lift the vehicle …
Where to Find the Fuse Box of the 2011 Mercedes Viano
Where to Find the Fuse Box of the 2011 Mercedes Viano
Mercedes Viano (2003-2013 / W639, MK 1) Below, you will discover where the fuse box is located in your 2011 Mercedes Viano W639. Before proceeding, remember that any maintenance operation m…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos