Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fold Down the Rear Seats of a Mercedes GLE

Model: Mercedes Gle V167 - Years 2019-2026
Part: Seat

Before starting, open the rear hatch of the Mercedes GLE. This will give you access to the buttons that release the latches securing the rear seatbacks. Begin by pressing the three buttons located in the cargo area to release the three rear seatbacks. Once you press the three buttons, the seats will fold down automatically. After completing this step, you will have successfully increased the cargo space in your Mercedes GLE.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Lower the Rear Seats of the Mercedes GLE
How to Lower the Rear Seats of the Mercedes GLE
Mercedes Gle (2019-2026 / V167) Below are the instructions to lower the rear seats of the Mercedes GLE in simple and quick steps. First, open the rear doors and start pressing the l…
Where is the Auxiliary Battery in the Mercedes GLE?
Where is the Auxiliary Battery in the Mercedes GLE?
Mercedes Gle (2019-2026 / V167) The auxiliary battery in the Mercedes GLE is located inside the cabin: to access it, you will need to loosen the screws that secure the rear seats so…
Where are the Fuses Located in the Mercedes GLE?
Where are the Fuses Located in the Mercedes GLE?
Mercedes Gle (2015-2019 / C292) The fuses in the Mercedes GLE are housed in dedicated fuse boxes designed to contain them: in this type of vehicle, you will find four boxes that hol…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos