Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Trunk Liner on Mercedes GLE

Model: Mercedes Gle V167 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

With the engine off and the parking brake engaged, open the trunk hatch. First, remove the surface part of the handle by prying it in the gap with a small flat screwdriver or a plastic wedge.

At this point, you will uncover two screws that you need to remove. Now, using the plastic wedge, pull out the lower part of the trunk liner just enough to access the connectors, which you will need to disconnect.

After removing this part of the panel, take off the caps and unscrew the screws of the main lock. Follow this procedure until complete disassembly.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

Mercedes Gle (2015-2019 / C292) Removing the tail light from a Mercedes GLE is a simple and quick task you can do yourself. To perform this operation, you need a 20 mm socket screwd…
Mercedes Gle (2019-2026 / V167) The layout of the fuse boxes in the Mercedes GLE is clearly explained in this short video clip that shows how this vehicle has its fuses distributed …
Mercedes Gle (2019-2026 / V167) The fuses in the Mercedes GLE are contained within specific fuse boxes installed in the vehicle: this type of car has three. The first is located in …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Change the Key Fob Battery for an Audi Q8?

To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery.

Watch the video!


by ScegliAuto

More videos