Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Panel and Switch Panel on Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

If you only want to remove the window switch panel, just get a plastic wedge and pry it up from underneath. Once removed, simply disconnect the connector.

If you need to remove the entire door panel, follow the procedure shown in the video: remove the two screws under the door armrest, then use any sharp object like a wedge or flathead screwdriver to pry around the edges of the panel, detaching it gradually from the door and disconnecting the internal wires during extraction.

Goodbye!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
Mercedes Classe C (2014-2021 / W205) .. begin, open the front door of your Mercedes C-Class. Start by inserting the tip of a thin but sturdy tool into the gap between the window switch panel.. …
Mercedes Classe C (2007-2013 / W204) .. the window switch panel on the Mercedes-Benz C-Class, following these simple steps. First, open the front door and start unscrewing the mounting screws.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos