Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the LCD Display in the Instrument Cluster on the Mercedes C-Class W203

Model: Mercedes Classe C W203 - Years 2000-2007

Video tutorial
Detailed instructions - In today's tutorial video, you will learn how to disassemble the instrument cluster and replace the LCD display on the Mercedes C-Class W203 by following these simple steps. First, get inside the vehicle and remove the instrument cluster; to do this, use a thin, pointed tool to pry at the sides to release the side clips: disconnect the electrical connector to remove it completely. At this point, release the internal clips of the cluster to access the circuit board and the display; gently disconnect it and replace it with the new one!

Updated on 22 April 2026 by ScegliAuto


Related tutorials

Reset the Service Light on the Mercedes C-Class W203
Reset the Service Light on the Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) .. The instrument cluster of the Mercedes C-Class W203 displays a warning when it's time to change the engine oil. After completing this important.. …
How to Reset ESP Off on the Mercedes W203 Class C
How to Reset ESP Off on the Mercedes W203 Class C
Mercedes Classe C (2000-2007 / W203) When the ESP off light appears on the dashboard of your Mercedes W203 Class C, simply follow the instructions in the video. As with any other system …
How to Reset the Service Light on a Mercedes C-Class 220 CDI W203
How to Reset the Service Light on a Mercedes C-Class 220 CDI W203
Mercedes Classe C (2000-2007 / W203) .. regular oil change maintenance on a Mercedes C-Class W203. First, get inside the car and turn on the ignition; then press the button located at the.. …

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos