Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset ESP off on Mercedes W203 C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: -board computer
Operation: How to reset ESP off on Mercedes W203 C-Class

When the ESP off light appears on the dial of your Mercedes W203 C-Class, all you have to do is follow the instructions contained in the video. As with any other kind of system reset you must first turn the instrument panel on to position 1 (only half a turn of the key). Make sure that the diagnostic system is indicated on your display. After that complete the turn of the key but without starting the engine. At this point, press the button found on the left of the instrument panel and look for the ESP system off. From this point on, follow the steps indicated in the video.


Posted on 23 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos