Do it yourself
| ||||
|
Mercedes Classe C - Video tutorial
Model: Mercedes Classe C
W203
- Years 2000-2007 When the ESP warning light appears on the instrument panel of a Mercedes C-Class, it means that a general malfunction has occurred in the system that manages traction control: this malfunction could be due to any damage or a generic anomaly stored in the control unit. It will therefore be necessary to connect a diagnostic tool to the OBD port of the vehicle, located in the lower left part of the dashboard compared to the steering column: after the car model and the corresponding version have been selected, it will be possible to reset the error by turning off the warning light.
Posted on 11 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |