Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ESP on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Warning light – error code

If you want to reset the ESP warning light, which is the electronic stability control, you will find the information and steps to follow in the description below and in the video. First, access the cabin and turn on the ignition. The instrument cluster display will indicate that the ESP is deactivated; then proceed to turn the steering wheel all the way to the right and immediately after all the way to the left. This will complete the reset, and you can turn off and on the ignition to verify that the error light has turned off.

Updated on 17 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the ESP Light on the Mercedes C-Class W204
How to Reset the ESP Light on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. reset the ESP and ABS lights on the Mercedes C-Class W204 by following the instructions below. First, get in the vehicle and connect your diagnostic.. …
How to deactivate the ESP on the Mercedes C-Class
How to deactivate the ESP on the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. in case of rain or slippery road. On a Mercedes Classe C vehicle, model W205, to deactivate the traction control we must turn on the vehicle's instrument.. …
How to reset the ESP light on a Mercedes C-Class
How to reset the ESP light on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. the ESP warning light error on a Mercedes C-Class: this problem occurs due to the loss of steering angle calibration when the battery is disconnected... …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos