Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the car stereo in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Car stereo
Operation: How to remove the car stereo in the Mercedes C-Class?

In the attached video tutorial we can see how to remove the car radio of the Mercedes C-Class W204, valid for the models of 2012 and later. First you need to remove the dashboard plate using the appropriate tool, so as not to cause any damage. Once the plate has been disengaged, the central part of the air vents must be removed by releasing the internal clips, as shown in detail in the video. Again, the appropriate tool must be used. Once that area is free, we proceed by removing the 2 Torx screws and extract the car radio from the slot.


Posted on 12 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can there be on the car radio of the Mercedes C220 CDI? Read Answer
    • Classe C 2007-2013 - What problems with the car radio of the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Car radio fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos