Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you remove the car stereo from the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Car stereo
Operation: How do you remove the car stereo from the Mercedes C-Class?

In order to remove the car radio of the Mercedes C-Class you must first press the button located under the gear lever to open the glovebox located in the central tunnel. This will allow you to detach the cover under the gearbox and loosen its screws underneath. Once these have been removed, it will be possible to remove the entire center console by releasing its retaining clips. The car radio will be located in the rear part of the center console: by unscrewing the fastening bolts and disconnecting the connectors in the rear, it will be possible to remove it.


Posted on 14 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can there be on the car radio of the Mercedes C220 CDI? Read Answer
    • Classe C 2007-2013 - What problems with the car radio of the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Car radio fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos