Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Low Beam Bulb on the Mercedes 180 Class A

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Headlight bulb

The video shows how to replace the low beam bulb on the Mercedes 180 Class A. This is a very simple task that can be done without going to a mechanic and takes little time. In fact, without removing everything, you can access the bulbs much more quickly. First, open the access panel located in the wheel well to reach the bulbs directly. At this point, unscrew the bulb to be replaced and install a new one. Finally, close the access panel and check that the low beam bulb works correctly.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Low Beam Bulb on a Mercedes A-Class
Replacing the Low Beam Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) This guide shows how to remove and replace the low beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing…
How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
Mercedes Classe A (2012-2018 / W176) Learn how to replace the low beam headlight bulbs on the new Mercedes A-Class 180 Sport. On this vehicle, access to the front headlight bulbs is loca…
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to remove and replace the low beam headlight bulbs in the front headlights of a 2014 Mercedes A-Class. The…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos