Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to replace low beam bulbs in a Mercedes A-Class

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Headlight bulb
Operation: How to replace low beam bulbs in a Mercedes A-Class

In this video tutorial, we will discover together how to remove and how to replace the low beam bulbs of the front headlights in a Mercedes A-Class of 2014. The spare parts used for the execution of this maintenance work are: - zes 2 led low beam bulbs with active dissipation, part of the super white line with H15 base; - aluminum adapters that perform a half rotation; - the perforated fabric for filtering, which allows the air to be exchanged well (with consequent modification to the cap); - a capacitor. To remove and replace the low beam lights in your Mercedes A-Class, you will need to remove and extract the headlight by accessing it from the wheel arch.


Posted on 22 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2004-2012 - Why don't the dipped beam lights on the Mercedes A-Class work? Read Answer
    • Classe A 2004-2012 - What problems with the low beam lights on the Mercedes A-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos