Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

In today's video, see how to replace the serpentine belt on the Mercedes A-Class W168. This procedure is similar for A-Class (W169), B-Class (W245), and Vaneo (W414). However, there may be slight differences due to specific design features of the vehicle.

Let's begin.

First, lift the car using a jack or place it on a lift. Remove the tensioner pulley.

Now, take off the belt from its location. We can now install the new belt.

Pull the tensioner pulley. Position the serpentine belt on the crankshaft pulley, and you're done.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on a Mercedes A-Class
How to Replace the Serpentine Belt on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and engage the parking brake on your Mercedes A-Class, then lift the car. Begin by loosening the tensioner by simply loosening the corresponding mounting.. …
Always Monitor the Serpentine Belt to Check the Timing Belt Condition on the Mercedes A-Class
Always Monitor the Serpentine Belt to Check the Timing Belt Condition on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. serpentine belt during a service on a Mercedes A-Class provides important insights regarding the functionality of the timing belt. If the serpentine belt.. …
How and When to Change the Timing Belt on the Mercedes A-Class 1.5 CDI
How and When to Change the Timing Belt on the Mercedes A-Class 1.5 CDI
Mercedes Classe A (2012-2018 / W176) .. how to replace the timing belt on the Mercedes A-Class 1.5 CDI. The manufacturer recommends replacing the belt every 5 years or 100,000 miles for the.. …

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos