Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Headlight

Learn how to replace the low beam headlight bulbs on the new Mercedes A-Class 180 Sport. On this vehicle, access to the front headlight bulbs is located inside the front fenders. Corresponding to the headlight for which you want to replace the bulb, there is a small access door "marked" on the splash guard plastic inside the fender. To open the access door and reach the bulbs of the headlight you are interested in, turn the corresponding wheel inward to the maximum using the steering. Once this is done, open the access door and remove the bulb to be replaced.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Low Beam Bulb on the Mercedes 180 Class A
Replacing the Low Beam Bulb on the Mercedes 180 Class A
Mercedes Classe A (2018-2026 / W177) The video shows how to replace the low beam bulb on the Mercedes 180 Class A. This is a very simple task that can be done without going to a mechanic…
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
How to Replace Low Beam Headlight Bulbs in a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to remove and replace the low beam headlight bulbs in the front headlights of a 2014 Mercedes A-Class. The…
Guide to Replacing the Low Beam Bulb on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Discover the procedure to remove and replace the low beam bulb on the Mercedes A-Class. In this video, the procedure is shown with the headlight remo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos