Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Low Beam Bulb on a Mercedes A-Class

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Headlight bulb

This guide shows how to remove and replace the low beam bulb in the front headlight of a Mercedes A-Class. First, open the hood and start by removing the tray located above the headlight; then remove the protective cap of the bulb to access it by disconnecting the electrical connector. Now, release the metal clip to remove and replace the low beam bulb with a new one that has the same fitting; then reassemble everything, performing the same operation to replace the other bulb in the front headlight!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Low Beam Bulb on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the low beam bulb on the Mercedes A-Class. In this video, the procedure is shown with the headlight removed from the body; however, the replacement.. …
Replacement of the front headlight bulb of the Mercedes A-Class
Replacement of the front headlight bulb of the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. If the headlight bulb of the Mercedes Classe A low beam light burns out, we must proceed to replace it as soon as possible, for our safety.. …
How to Open a Stuck Fuel Door on a Mercedes A-Class
How to Open a Stuck Fuel Door on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. you begin, open the trunk of your Mercedes A-Class. Start by removing and lowering the left side inner cover. Next, remove the first aid kit located.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos