Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Windshield Wiper Blade on a Mercedes A-Class

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

Before starting, exit the cabin of your Mercedes A-Class and head to the front hood. Begin by lifting the entire wiper arm, also raising the blade that needs to be replaced.

Next, position the blade perpendicular to the support arm, then gently pull the blade towards your left to disengage and free it, completing the removal. To install the new blade on your Mercedes A-Class, repeat this simple procedure in reverse, and you will have completed the replacement.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. the windshield wiper blades on a Mercedes A-Class, lift the arm connected to the blade away from the windshield. This will allow you to press on.. …
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. the windshield wiper blades on a Mercedes A-Class, lift the arm connected to the wiper motor to detach the blades from the windshield. To remove.. …
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. windshield wiper blades on the Mercedes Benz A-Class W176. This operation takes only a few seconds and does not require any specific tools. After parking.. …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos