Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and How to Change the Timing Chain on the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

In today's video tutorial, you will learn how and when to replace the timing chain on the Mercedes E-Class, following the instructions below. The timing chain for this type of vehicle generally needs to be changed between 100,000 and 180,000 miles; this may vary depending on the engine type.

To remove and replace the timing chain, you must take the engine block out of the vehicle; then remove the timing cover to access the chain, in order to replace it, following the video tutorial until the end!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Chain on the Mercedes E-Class
Guide to Replacing the Timing Chain on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. for replacing the timing chain on the Mercedes E-Class; the manufacturer recommends replacing the timing chain every 137,500 miles. To access the timing.. …
How to Replace the Timing Chain on a Mercedes E-Class?
How to Replace the Timing Chain on a Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. To replace the timing chain on a Mercedes E-Class, you must completely remove the engine block from its housing for easier access. Start by unbolting.. …
How to Replace the Timing Chain on a Mercedes E-Class?
How to Replace the Timing Chain on a Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. replacing the timing chain on a Mercedes E-Class, remove some obstructing components in the engine compartment, such as the right front headlight.. …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos