Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses in the Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Fuse box

In today's video, we will cover something very important to know: where the fuse box is located in the Mercedes A-Class W169. Additionally, we will see two other pieces of information. The fuse box and the auxiliary battery are located in the passenger footwell. You will need to remove the footrest mat to find a compartment in the carpet; remove the cover to access it. The relay control unit is located a bit further ahead; you will need to pull back the carpet from one edge to access it. You can find the complete diagram in your vehicle's owner's manual.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Mercedes A-Class?
Where are the fuses located in the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. The fuses in the Mercedes A-Class are divided between two fuse boxes located within the vehicle: this model has two boxes. The first.. …
Where are the fuses located in the Mercedes A-Class?
Where are the fuses located in the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. The fuses in the Mercedes A-Class are located inside the fuse box. This is found in the cabin, under a cover at the base of the passenger.. …
Where Are the Fuses in the Mercedes A-Class?
Where Are the Fuses in the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. All fuse boxes in the Mercedes A-Class contain fuses that control the operation of the devices installed in the vehicle: this type of.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos