Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Exterior Rearview Mirror on the Mercedes E-Class

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Side mirror

See other generations:
Video tutorial

In this video, learn how to remove and replace the exterior rearview mirror on the Mercedes E-Class by following the instructions below. First, open the front door and start by removing the plastic cover behind the mirror; then, pull away the weatherstrip and remove the side cover of the dashboard to disconnect the electrical connector for the mirror, as shown in the video.

At this point, unscrew the screws located behind the mirror using a T27 Torx screwdriver; then, slide the mirror out from the outside!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Replacement of the outer rearview mirror cap of the Mercedes E-Class.
Replacement of the outer rearview mirror cap of the Mercedes E-Class.
Mercedes Classe E (1995-2002 / W210) .. the external rearview mirror of the Mercedes E-Class. First of all, move to the outside of the vehicle and start by closing the rearview mirrors (automatically.. …
How to Replace the Outer Mirror Cap on a Mercedes E-Class
How to Replace the Outer Mirror Cap on a Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. and replace the outer mirror cap on a Mercedes E-Class. First, move to the outside of the vehicle and electrically fold the mirrors in; then, pry on the.. …
Removing the Side Mirror of the Mercedes E-Class
Removing the Side Mirror of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the side mirror of the Mercedes E-Class. First, move to the outside of your car and start by removing the mirror glass, disconnecting the.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos