Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio from a Mercedes C-Class

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Car stereo

Get in the car and first, remove the plastic trim around the gear shift by hand, as shown in the video. Also, take out the small compartment under the car radio and disconnect its cables. Unscrew the two screws that are now exposed, then remove the air vents to access the two upper screws of the car radio. Once these are unscrewed, pull out the car radio and disconnect the rear connector. As you can see, this is a fairly simple operation and manageable even for less experienced mechanics. Proceed in reverse order for reassembly.

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Stereo from Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Let's remove the stereo from a Mercedes C-Class. Use plastic levers to detach the air vents. Pry at the sides of the air vents until they come.. …
How to replace the fuse of the radio of the Mercedes C-Class
How to replace the fuse of the radio of the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. and replace the fuse of the Mercedes C-Class car radio, in simple steps. First, let's locate the fuse box where the car radio fuse is located;.. …
How to Remove the Rear Door Panel of a Mercedes C-Class
How to Remove the Rear Door Panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos