Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove and Replace Windshield Wipers

Model: Mercedes Classe S MK 3, W140 - Years 1991-1998
Part: Windshield wipers

This video shows how to remove and replace the front windshield wipers on your car. Once you purchase the new wipers of the correct size and your preferred brand, start by removing the old wipers. First, locate the hook to press to release the old wipers; use a tool or a screwdriver to disengage the hook. Once removed, slide off the old wiper and insert the new one. Always perform the same operation to install the second wiper; once installed, test them to ensure proper installation.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on a Mercedes-Benz S-Class?
Where Are the Fuses Located on a Mercedes-Benz S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) Any fuse on the Mercedes-Benz S-Class is located inside one of the designated fuse boxes present in the vehicle: there are four of these on this type…
Where Are the Fuses in the Mercedes-Benz S-Class?
Where Are the Fuses in the Mercedes-Benz S-Class?
Mercedes Classe S (2020-2026 / W223) In the Mercedes-Benz S-Class, all fuses are responsible for managing the operation of one or more devices installed in the vehicle: in this type of v…
Windshield Wiper Blade Replacement Instructions
Windshield Wiper Blade Replacement Instructions
Mercedes Classe S (1991-1998 / MK 3, W140) Replacing the wiper blades requires two different steps to install the passenger side and then the driver side; start with the passenger side: to lif…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos