Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windshield Wiper Blade Replacement Instructions

Model: Mercedes Classe S W140, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the wiper blades requires two different steps to install the passenger side and then the driver side; start with the passenger side: to lift the wiper arm and detach the blade, fully open the hood, raising it to 90° to engage the hinges; at this point, lift the wiper arm, rotate the hook 90°, and release the lock to remove it and insert the new one; then lower the hood: the wipers will rise enough to repeat the operation on the driver side.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Battery Replacement Instructions
Battery Replacement Instructions
Mercedes Classe S (2005-2013 / W221, MK 5) Replacing the battery is one of the common DIY maintenance tasks, but it is recommended to dispose of the old one properly. In this car model, the ba…
Brake Pad Replacement
Brake Pad Replacement
Mercedes Classe S (1991-1998 / W140, MK 3) The efficiency of the braking system is essential for ensuring the safety of the driver, passengers, and other motorists. This guide explains the key…
Replacing the Glow Plugs on the Mercedes S-Class 2.2 Diesel
Replacing the Glow Plugs on the Mercedes S-Class 2.2 Diesel
Mercedes Classe S (2005-2013 / W221, MK 5) In this guide, follow the instructions to remove and replace the glow plugs of the Mercedes S-Class 2.2 Diesel engine. First, open the hood of your c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos