Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on the Mercedes S-Class 2.2 Diesel

Model: Mercedes Classe S W221, MK 5 - Years 2005-2013
Part: Glow plugs

In this guide, follow the instructions to remove and replace the glow plugs of the Mercedes S-Class 2.2 Diesel engine. First, open the hood of your car and start disconnecting the intake hoses by unplugging the electrical connector of the mass air sensor and removing the clamp screw; then disconnect the glow plug connectors and use a socket wrench with an extension to unscrew and remove them, as shown in the video. At this point, install the new original glow plugs, following the video tutorial to the end!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the sun visor of the Mercedes S-Class
How to disassemble the sun visor of the Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Today we will see the instructions that will allow us to disassemble and replace the sun visor of the Mercedes S-Class. First, we get on board the ca…
How to Replace the Exterior Rearview Mirror on the Mercedes S-Class
How to Replace the Exterior Rearview Mirror on the Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) Replacing the exterior rearview mirror on the Mercedes S-Class is a simple and quick task to perform independently. Using a flathead screwdriver, pus…
How to replace the battery of the Mercedes S-Class remote control
How to replace the battery of the Mercedes S-Class remote control
Mercedes Classe S (2020-2026 / W223) Today we will replace the battery of the remote control for the Mercedes S-Class car. During the replacement, we will use a flat-head screwdriver and…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos