Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Mirror Cap on the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Side mirror

As shown in this tutorial, replacing the outer mirror cap on the Mercedes C-Class is a very simple and quick task. To do this, you will need a plastic trim tool to avoid damaging the bodywork and the mirror itself. First, pry the glass loose from the outer edge, then disconnect the two small connectors and continue prying along the lower seam of the cap. Once done, move to the rear seam, and with a bit of patience, you will be able to completely remove it.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Mirror on the Mercedes C-Class?
How to Replace the Outside Mirror on the Mercedes C-Class?
Mercedes Classe C (1993-2000 / W202) .. To replace the outside mirror on the Mercedes C-Class, slightly close the mirror to leverage under the cap. This will allow you to detach the cap from.. …
Replacing Mirror on Mercedes C-Class
Replacing Mirror on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. of the external mirror on your Mercedes C-Class broken? Let's see how to replace it. Pry with a plastic tool between the mirror housing and the.. …
Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Replacement of the turn signal lights in the exterior rearview mirror of the Mercedes Class C.
Mercedes Classe C (2000-2007 / W203) .. of the exterior rearview mirror of the Mercedes Class C. First, let's move to the side and gently detach the cover of the exterior rearview mirror by.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos