|
Do it yourself
| |||
| ||||
How to Remove the Exterior Handle on a Mercedes C-Class?
Model: Mercedes Classe C
W205
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
In this tutorial, you will see how to remove the exterior handle on a Mercedes C-Class, a very simple and quick operation. First, open the door in question, then remove the small rubber cap indicated and unscrew the bolt located inside the hole with a long T20 Torx screwdriver. Once this is done, pull the handle towards you as if to open the lock, grasp the indicated plastic element, and pull it out from inside the door. At this point, just push the handle slightly towards the rear of the car and remove it completely.
Updated on 6 June 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. handle on the rear door of the Mercedes-Benz C-Class, you must first open the door and detach the seal covering the entire outer part of the door. Behind.. …
Mercedes Classe C
(2014-2021 /
W205)
.. the outer door handle on a Mercedes-Benz C-Class, open the door and remove the rubber cap located on the side of the door. This will allow you to.. …
Mercedes Classe C
(2000-2007 /
W203)
.. handle on the driver side of a Mercedes Benz C-Class W203. First, open the front door and unscrew the door latch screw; then remove the tweeter by first.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |