Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Steering Pump on a Mercedes A-Class W168

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Pump

In this video, we will go through the main steps to remove and replace the power steering pump on a Mercedes A-Class W168. First, open the hood and start by removing the battery to access the power steering pump located underneath. Next, unscrew all the mounting bolts on the pump and then disconnect the electrical connectors as shown in the video. At this point, you can replace the power steering pump with the new one, using the original part, following the video until the end!

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Diagram for the Mercedes A-Class
Fuse Diagram for the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) This model from the German manufacturer has a fuse box located in the cabin, specifically under the floor near the passenger seat. To access it, remo…
Cabin Air Filter Replacement for Mercedes A-Class 140 W168
Cabin Air Filter Replacement for Mercedes A-Class 140 W168
Mercedes Classe A (1997-2004 / W168) Today we will see the instructions to remove and replace the cabin air filter of a Mercedes A-Class 140 W168, first series. First, open the hood of y…
Instructions for Replacing the Timing Belt on Mercedes A-Class W168
Instructions for Replacing the Timing Belt on Mercedes A-Class W168
Mercedes Classe A (1997-2004 / W168) .. how to replace the timing belt on a Mercedes A-Class W168. First, obtain the new belt of the correct type (find the code printed on the belt itself);.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos