|
Do it yourself
| |||
| ||||
How to Reset Maintenance on the Mercedes Benz C-Class
Model: Mercedes Classe C
W205
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
The video shows how to reset the 'service' message for a Mercedes Benz C-Class model 300. As mentioned in the video, this procedure is also valid for other models of Mercedes Benz, including the C220 Sport Coupe. To reset, insert the key into its slot and turn it one position to power on the dashboard. Now, press two buttons on the sides of the steering wheel: the first is the phone receiver button for making or answering calls, and the other is the OK button on the opposite side of the steering wheel while still holding the receiver button. Use the + and - buttons to scroll through the menu until you reach the mileage. Press OK, select Assistance Plus, press OK again, choose 'full service,' and press OK. At this point, the display will ask if the service has been performed, and you should confirm by selecting yes.
Updated on 11 June 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. To replace the radio in a Mercedes-Benz C-Class, pry at the bottom of the device to remove the air vents from their housing. Once the vents are.. …
Mercedes Classe C
(2014-2021 /
W205)
.. To reset the TPMS light on a Mercedes-Benz C-Class, get in the vehicle and turn on the dashboard without starting the engine. Use the controls on.. …
Mercedes Classe C
(2007-2013 /
W204)
.. replace the window switch in a Mercedes-Benz C-Class, which requires removing the door panel. First, remove the inner cover of the mirror and the outer.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the cigarette lighter fuse on the Ford Fiesta?
The fuse for the cigarette lighter socket on the 2010 Ford Fiesta is located inside the fuse box within the vehicle. Specifically, the fuse is found in the driver’s side glove compartment. To check the fuse after confirming that the socket is not working, you need to remove the entire compartment. The relevant fuse is numbered 6 and rated at 20 watts. Once you have removed the damaged fuse, insert a new one to restore proper function to the socket. If the problem persists, it indicates an issue with the control unit, in which case you will need to visit a garage for a diagnostic check. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |