Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the rearview mirror in a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Outside rearview mirror
Operation: How to replace the rearview mirror in a Mercedes C-Class

In this video tutorial we can see how it is possible to replace the rear-view mirror in a Mercedes C-Class, following a few simple steps: the first thing to do is to push the glass inwards at the lower edge and release the latches. upper and then remove the mirror; extract the four clips arranged on the back side (as shown in the video). Carefully remove the rearview heating cable. Loosen the three Phillips screws and remove the mirror frame; unhook three more hooks to remove the exterior mirror casing. Open the door and remove the trim on the inside of the door, disconnect the speaker cable and remove the cover that connects the door to the console. Uncover all cables going upward. Unscrew the three fixing screws in the external rear-view mirror (during this operation it is necessary to hold the rear-view mirror and slide the entire module outwards).


Posted on 14 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos