Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the on-board computer

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: -board computer
Operation: How to reset the on-board computer

Cars that are equipped with a high level of comfort are equipped with on-board computers capable of signaling all the necessary services and if there are any on-board failures. In some circumstances it may be necessary to reset the on-board computer. The on-board computer is a precise and sophisticated instrument that signals the various operations to be carried out. However, whenever certain operations are carried out, the sensors must be replaced if necessary and the computer reset so that when new operations need to be performed, it will be able to report them. If you do not want to go to authorized workshops but do it yourself, you will need to: turn on the ignition, press the partial mileage reset button, select the function to reset with the high beam lever and press the button on the lights, until the word reset appears.


Posted on 12 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos