Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to remove the door panel in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door panel
Operation: How to remove the door panel in the Mercedes C-Class?

As we can see in this tutorial, removing the door panel in the Mercedes C-Class is a very simple and fast operation. We start by going inside the passenger compartment, after which we disengage the internal cover of the mirror, possibly with the help of a plastic spatula. Then unscrew the two screws located under the handle, grab the panel from the lower edge and disengage it from the door following the entire perimeter. Finally, we unhook the clip located on the external side, disconnect the connector of the window regulator console and proceed with the assembly of any spare part.


Posted on 22 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos