Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Display in a Mercedes A-Class?

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

As seen in this tutorial, replacing the main display in a Mercedes A-Class is an extremely simple and quick operation. First, ensure the key is not inserted.

Next, apply tape to the indicated slot to avoid leaving marks. Remove the two screws located on the back of the display using a Phillips screwdriver.

Pry along the top edge and disengage it from the dashboard. Finally, disconnect all the rear connectors, connect them to the replacement, and install the new display by following the reverse procedure.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2004-2012 / W169) .. to repair the onboard computer of the Mercedes A-Class. This video also applies to the contemporaneous Mercedes B-Class, as it features the same central.. …
Mercedes Classe A (2004-2012 / W169) .. learn how to replace the display on a Mercedes A-Class. If any letters are missing from the text on the central display of the instrument cluster, it.. …
Mercedes Classe A (2004-2012 / W169) .. the multifunction display of the Mercedes Benz A-Class W169. With the instrument cluster on, press the button at the bottom left of the steering wheel.. …

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos