|
Do it yourself
| |||
| ||||
Replacing Interior Door Handle
Model: Mercedes Classe C
W203
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
A common issue is the cracking of the interior door handle, which often becomes annoyingly sticky. One solution is to simply detach the handle cover, clean it with solvent to remove the coating film, and then paint or wrap it with a carbon fiber effect film. If you want to replace it, you need to remove the door panel by taking out the screws beneath the handle, the one under the "SRS" cap, the trim around the lock, and the plastic triangle behind the outside mirror. Then, detach the clips, disconnect the cable from the handle, and unscrew the two mounting screws for the handle support. Proceed in reverse for the installation of the new handle, transferring the foam from the old one.
Updated on 16 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
Want to replace the door panel handle? Let's see how to remove the door panel on a C-Class. Remove the inner handle cover, then unscrew the screws lo…
Mercedes Classe C
(2007-2013 /
W204)
The instructions below will allow us to disassemble and replace the internal door handle of the front door of the Mercedes Class C. First, let's open…
Mercedes Classe C
(2007-2013 /
W204)
Today, you will see the instructions to remove and replace the interior door handle of the front door of the Mercedes C-Class. First, open the front …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |