Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box on the Mercedes GLK

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fuse box

Video tutorial

The location of the fuse box on your Mercedes GLK (2008-2015) is quite unusual, making it not always easy to locate. However, with the following instructions, you will be able to find it quickly and safely.

Before proceeding, remember to disconnect the car battery if you intend to perform maintenance or replace the fuses. Then, fully lift the rear boot and remove the lower panel.

Next, locate the fuse box on the right side and remove the cover to access the fuses.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Fuse diagram for a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) In this very short tutorial video, we can see the exact position of the two fuse boxes located inside our first-generation Mercedes GLK, produced fro…
Where are the fuses located in the Mercedes GLK?
Where are the fuses located in the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) In the Mercedes GLK, any fuse will be installed inside one of the designated fuse boxes mounted on the vehicle: in this type of vehicle, there are tw…
Layout and positioning of the external fuses of the Mercedes GLK
Layout and positioning of the external fuses of the Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) We will briefly outline the steps to access the external fuse box of the Mercedes GLK, obtaining the fuse diagram and layout. First, open the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos