Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Mercedes ML

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Clock

In this video tutorial, learn how to set the correct time on the small display of the instrument cluster in the Mercedes ML by following the instructions below. First, get inside the vehicle and switch on the instrument cluster; then, rotate the knob found on the right side of the instrument cluster, holding it down to adjust the hour, as shown in the video. At this point, pull the knob forward to switch to minute adjustment, making the same adjustments as before; then press the knob again to exit the setting!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Mercedes ML
How to Set the Time on the Mercedes ML
Mercedes Classe M (2005-2011 / W164) This guide briefly outlines the steps to correctly set the date and time on the Mercedes ML. First, get into the vehicle and turn on the instrument c…
How to Set the Time in a Mercedes M-Class?
How to Set the Time in a Mercedes M-Class?
Mercedes Classe M (2011-2018 / W166) In this tutorial, you will see how to set the time in a Mercedes M-Class, a very simple and quick operation, to be done for example after disconnecti…
How to set the time on the Mercedes M-Class
How to set the time on the Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) In this short guide, we will see the instructions that will allow us to set the time on the central display of the Mercedes Class M. First of all, we…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos