Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper on a Mercedes A-Class?

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Rear bumper

In this tutorial, you will see how to remove the rear bumper on a Mercedes A-Class, a very simple operation. First, open the trunk lid. Then, remove the indicated rubber plugs and unscrew the bolts underneath them with a 8mm wrench. Next, remove the clips located inside both wheel wells, unscrew the 2 bolts in the same position, and the last ones located at the lower edge. Once this is done, grasp the bumper from one of the 2 sides and start to disengage it from the frame. To install the replacement, follow the reverse procedure.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Mercedes A-Class
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. you begin, lift the front of your Mercedes A-Class. Start by disconnecting and removing the clips securing the rear bumper. Next, unscrew and remove.. …
How to Remove and Replace the Rear Bumper on Mercedes A-Class
How to Remove and Replace the Rear Bumper on Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. and replace the rear bumper on a Mercedes A-Class. First, open the trunk lid and start removing the cargo area floor; inside, you will find the bumper.. …
Removing the Rear Bumper of the Mercedes A-Class
Removing the Rear Bumper of the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the rear bumper of the Mercedes A-Class. First, open the trunk lid and start removing the interior trim of the floor, accessing the inside.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos