Do it yourself
| ||||
|
Mercedes Classe B - Video tutorial
Model: Mercedes Classe B
MK 2, W246
- Years 2011-2019 This video shows how to perform the maintenance warning light reset procedure on a 2013 Mercedes Class B. To do this, first turn on the ignition and ensure that the vehicle's mileage is displayed on the instrument panel. If it is not, press the back button on the left side of the steering wheel until it appears. Then turn off the ignition, turn the key to position 1, and press the OK and phone buttons (in that order). This will open the menu. Use the arrow buttons on the left side of the steering wheel to scroll to the "Assist Plus" option and press OK. Then scroll to "Full Service" and press OK, confirm the full service, confirm the oil temperature, and all other prompts that appear. When the message "Maintenance Complete" appears, it means that the reset has been successful.
Posted on 25 April 2023 by ScegliAuto
How to reset the service on the Mercedes Class B180
Mercedes Classe B (2011-2019 / MK 2, W246) To reset the service of the Mercedes B180 Class, start by turning the ignition key to the first position, hold down the "ok" button on the left side
How to reset the service indicator light on the Mercedes B-Class.
Mercedes Classe B (2011-2019 / MK 2, W246) The reset of the service indicator, indicated by the wrench symbol, is an operation that must be performed after servicing operations such as changin
How do you reset the Service light on the Mercedes Classe B?
Mercedes Classe B (2011-2019 / MK 2, W246) The procedure to reset the Service indicator light on the Mercedes Classe B involves navigating through the menu using the arrows on the steering whe Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.071
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |