Do it yourself
Frequently asked questions about cars and motorcycles

How to Check the Inside of the Fuse Box on a Mercedes Benz W204

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

As shown in the video, this is a procedure that can be performed on any vehicle to check if the fuses inside their box, whether located in the cabin or outside, are functioning or blown. Open the fuse box. You will need to equip yourself with a 12-volt test light, the tip of which should be connected to the negative chassis ground.

At this point, simply touch the tip of the test light to each fuse: if the light turns on, it means the fuse is working correctly; if it does not turn on, you will need to replace the fuse.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) This tutorial illustrates the location of the 4 fuse boxes in a Mercedes Benz C-Class W204. The model is from 2013, but the fuse locations are identi…
Mercedes Classe C (2007-2013 / W204) The Mercedes C-Class model W204 has three fuse boxes. The first fuse box is located inside the vehicle, behind the driver’s dashboard panel. The seco…
Mercedes Classe C (2007-2013 / W204) In this guide, you will learn how to safely locate the fuse box that contains all the fuses for your Mercedes-Benz C-Class W204. First, lift the hood…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos