Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Window Regulator Motor

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Power window motor

First, remove the door panel. To do this, unscrew a series of screws with the appropriate screwdriver: one near the latch, one under the cover near the hinge, and one under the cover located beneath the door handle. Additionally, unscrew the lock retaining clip, detach the rearview mirror cover, and once the panel is lifted from its position, disconnect the wire that connects the door opening lever and all the electrical cables. Once the panel is moved aside, locate the electric motor and disconnect it from the battery. Unscrew the 3 screws with the appropriate screwdriver and gently pull the motor from its housing. Install the new motor by reversing the steps. The car is a Mercedes E-Class.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Regulator Motor on the Mercedes E-Class
How to Replace the Window Regulator Motor on the Mercedes E-Class
Mercedes Classe E (1984-1995 / W124) Replacing the window regulator motor on the Mercedes E-Class, model W124, is a straightforward task that you can perform independently, thanks to our…
How to Replace the Window Regulator on a Mercedes E-Class?
How to Replace the Window Regulator on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) To replace the window regulator on a Mercedes E-Class, first remove the inner cover near the rearview mirror. Next, lift the trim located below the w…
Removing the Power Window Motor
Removing the Power Window Motor
Mercedes Classe E (2002-2009 / W211) To remove the power window motor, first remove the door panel: take off the plastic cover applied to the lock, the cap located at the front of the pa…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos