Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Window Regulator Motor on the Mercedes E-Class

Model: Mercedes Classe E W124 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Power window motor

See other generations:
Video tutorial

Replacing the window regulator motor on the Mercedes E-Class, model W124, is a straightforward task that you can perform independently, thanks to our video tutorial. Start by opening the car door and removing the inner handle using a plastic trim tool for the plastic parts and a Torx wrench size 10 for the screw on the handle itself.

Once the handle is removed, you can take off the door panel. Proceed by unscrewing the glass fastening element and then securing the glass at the top with tape.

Continue by unscrewing the fastening elements of the window regulator assembly. After completing these steps, you can proceed with the installation of the new motor.

Begin by installing and tightening the motor fastening elements, then you can lower the window and install it in its place. Finally, reattach the door panel.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2002-2009 / W211) .. and replace the window switch on a Mercedes E-Class. First, open the door and start unscrewing the screws securing the lock; then remove the side plastic.. …
Mercedes Classe E (2016-2023 / W213) .. the window lift switch panel of the Mercedes E-Class. First, open the front door of the vehicle and start prying on the plastic cover that surrounds.. …
Mercedes Classe E (2009-2016 / W212) .. and replace the rear window on the Mercedes E-Class W212, following the instructions below. First, remove the old rear window; to do this, take off.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos