Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the window switch panel of the Mercedes E-Class

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Power window switch

See other generations:
Video tutorial

In this guide we will see the main instructions that will allow us to disassemble and replace the window lift switch panel of the Mercedes E-Class. First, open the front door of the vehicle and start prying on the plastic cover that surrounds the switch panel; then remove it, disconnecting the electrical connector found on the bottom, as shown in the video.

At this point, replace the individual button or the entire window lift switch panel, making the connection; check its operation before fixing it to the door panel.


Posted on 9 October 2025 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Mercedes E-Class Coupe
How to Remove the Door Panel of a Mercedes E-Class Coupe
Mercedes Classe E (2002-2009 / W211) .. To remove the door panel of a Mercedes E-Class Coupe, first disconnect the battery terminals. Start the disassembly: use a pry tool to remove.. …
How to Replace the Window Switch Console in a Mercedes E-Class?
How to Replace the Window Switch Console in a Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. the window switch console in a Mercedes E-Class W213, a very simple and quick operation. To do this, you will only need a plastic trim tool to.. …
How to Remove the Rear Door Panel on a Mercedes E-Class?
How to Remove the Rear Door Panel on a Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. to remove the rear door panel on a Mercedes E-Class W210. For this simple and quick operation, you will need a Phillips screwdriver and a plastic trim.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos