Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Power Window Motor

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Power window motor

See other generations:
Video tutorial

To remove the power window motor, first remove the door panel: take off the plastic cover applied to the lock, the cap located at the front of the panel, and the one inside the handle area to access the screws securing the panel; then pry along the edges to release the pressure clips and pull the panel away enough to disconnect the connectors and the lock cable; at this point, you can unscrew the screws securing the power window motor and disconnect the power connector to complete the removal.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Window Switch on a Mercedes E-Class
Removing and Replacing the Window Switch on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Below are the steps to remove and replace the window switch on a Mercedes E-Class. First, open the door and start unscrewing the screws securing the …
How to Replace the Window Regulator on a Mercedes E-Class?
How to Replace the Window Regulator on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) To replace the window regulator on a Mercedes E-Class, first remove the inner cover near the rearview mirror. Next, lift the trim located below the w…
Check Integrity of Window Regulator Fuse
Check Integrity of Window Regulator Fuse
Mercedes Classe E (2002-2009 / W211) If pressing the window switch does not cause the window to move, there may be a fault in the activation system. Before assuming the motor or switch i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos