Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Integrity of Window Regulator Fuse

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

If pressing the window switch does not cause the window to move, there may be a fault in the activation system. Before assuming the motor or switch is broken, ensure the system is properly powered and that the corresponding circuit protection fuse is intact.

The fuse is located in the panel on the driver's side of the dashboard. Open the door panel, remove the protective cover from the side of the dashboard, locate the fuse in position 33, and check the integrity of the filament.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Check Traction Control Fuse Integrity
Check Traction Control Fuse Integrity
Mercedes Classe E (2002-2009 / W211) If the traction control warning light illuminates on the dashboard and the vehicle tends to enter recovery mode, there may be a fault with the ABS mo…
How to Change the Power Window Switch
How to Change the Power Window Switch
Mercedes Classe E (2002-2009 / W211) One of the most common problems, especially in older cars, is a broken power window switch, the system that allows us to lower and raise the windows …
Check Integrity of Fuel Supply Lines
Check Integrity of Fuel Supply Lines
Mercedes Classe E (1995-2002 / W210) During routine maintenance, it is advisable, and strongly recommended, to check the integrity of the fuel supply lines. This is an aspect that is gen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos