Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Traction Control Fuse Integrity

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

If the traction control warning light illuminates on the dashboard and the vehicle tends to enter recovery mode, there may be a fault with the ABS module or the related protection fuse may have blown; start by checking the integrity of the fuse: open the hood and locate the fuse box next to the left front fender (driver's side), just behind the strut tower, remove the cover and check the position of the fuse inside, pull it from its socket and inspect the filament integrity; if the fuse is fine, there may be a problem with the ABS module.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Check Integrity of Window Regulator Fuse
Check Integrity of Window Regulator Fuse
Mercedes Classe E (2002-2009 / W211) If pressing the window switch does not cause the window to move, there may be a fault in the activation system. Before assuming the motor or switch i…
How to Disable Traction Control on the Mercedes E-Class?
How to Disable Traction Control on the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) To disable traction control on the Mercedes E-Class, turn on the instrument cluster to navigate through the options on the display using the arrows o…
Check Integrity of Fuel Supply Lines
Check Integrity of Fuel Supply Lines
Mercedes Classe E (1995-2002 / W210) During routine maintenance, it is advisable, and strongly recommended, to check the integrity of the fuel supply lines. This is an aspect that is gen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos