Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator on a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the window regulator on a Mercedes E-Class, first remove the inner cover near the rearview mirror. Next, lift the trim located below the window switch and loosen the screws underneath.

This will allow you to remove the panel after disconnecting the connectors. Then, secure the glass with tape and remove it from the mechanism by unscrewing the bolt at the top. By removing the screws that secure the inner panel, you can take out the window regulator from the back and replace it with a new part.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Window Switch on a Mercedes E-Class
Removing and Replacing the Window Switch on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the window switch on a Mercedes E-Class. First, open the door and start unscrewing the screws securing the lock; then remove the side plastic.. …
How to Replace the Window Switch on a Mercedes E-Class?
How to Replace the Window Switch on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the window switch on a Mercedes E-Class, use a lever tool to remove the switch from its housing in the center of the panel. Once the switch.. …
How to Reprogram the Power Window Switches on a Mercedes E-Class
How to Reprogram the Power Window Switches on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the power window switches on the Mercedes E-Class may stop functioning. Therefore, it is necessary to reprogram them. To reprogram the window switches,.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos