Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Switch on a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Power window switch

See other generations:
Video tutorial

To replace the window switch on a Mercedes E-Class, use a lever tool to remove the switch from its housing in the center of the panel. Once the switch is removed, disconnect the connectors located underneath the switch to fully take it out. At this point, connect the new replacement switch to the connectors so it can be inserted back into its place.

After installation, ensure it functions correctly.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to disassemble the window switch panel of the Mercedes E-Class
How to disassemble the window switch panel of the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. the window lift switch panel of the Mercedes E-Class. First, open the front door of the vehicle and start prying on the plastic cover that surrounds.. …
How to Remove the Rear Seat Bench of a Mercedes E-Class
How to Remove the Rear Seat Bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. start, open the rear doors of your Mercedes E-Class. Begin by prying off and removing the rear cup holder cover, then detach it by unscrewing the mounting.. …
Where is the fuse box of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) .. locate the fuse box inside your Mercedes E-Class W212. First, you need to reach the rear area of the car, then fully lift the hood and shift your.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos